Startseite Produkte Kraftstoffanlage-Teile

Standardkraftstoffanlage-Teile des luftventil-RK CA55 2 IMPCO

Alle Produkte

Kraftstoffanlage-Teile (60)

Mittelgroße Maschinen-Mischer IMPCO (18)

Große Maschinen-Mischer IMPCO (14)

IMPCO-Regler (6)

Niedriger Druckregler (7)

Hochdruckregler (3)

IMPCO-Reparatur-Sets (6)

IMPCO-Gas-Mischer (13)

IMPCO Lockoff (12)

Teile IMPCO LPG (47)

China guangqing(anhui)gas technologies co.,ltd. zertifizierungen

Ich bin online Chat Jetzt

Standardkraftstoffanlage-Teile des luftventil-RK CA55 2 IMPCO

Name: Standardkraftstoffanlage-Teile des luftventil-RK CA55 2 IMPCO
Brand: IMPCO
SKU: RK-CA55-2
Price: 1.00 USD
Availability: InStock
Rating: 5 (101 reviews)

Standard Air Valve RK CA55 2 IMPCO Fuel System Parts

Großes Bild : Standardkraftstoffanlage-Teile des luftventil-RK CA55 2 IMPCO

Produktdetails:

Herkunftsort:	USA
Markenname:	IMPCO
Modellnummer:	RK-CA55-2

Zahlung und Versand AGB:

Min Bestellmenge:	24
Preis:	Depending on quantity
Verpackung Informationen:	Karton
Lieferzeit:	8 Wochen
Zahlungsbedingungen:	T/T
Versorgungsmaterial-Fähigkeit:	1200pcs pro 8weeks

Kontakt

Ausführliche Produkt-Beschreibung

Produktname:

Reparatur-Set

Teilnummer:

RK-CA55-2

Marke:

IMPCO

Gemischzusammensetzung:

Mageres

Markieren:

Kraftstoffanlage-Teile RK CA55 2

Standardluftventil-Kraftstoffanlage-Teile

IMPCO-Kraftstoffanlage-Teile

IMPCO RK-CA55 , Model CA55 Carburetor Repair Kit , Standard Air Valve

The IMPCO RK-CA55-2 repair kit instructions will

provide the technician information to

repair the CA55 Mixer. Be sure the air valve you need is for lean fuel use.

REBUILD INSTRUCTIONS Disassembly

1. Remove the carburetor from the engine, then remove 4 screws (Sl-3) holding throttle body to mixer bowl.

2. Remove the throttle body. Note that the gasket retains idle cutoff piston in place (shown under finger tip).

Note: Not all 55 Series Carburetors are equipped with the cutoff piston.

3. Remove the gasket which will release the Idle cutoff piston and spring.

4. Remove the check valve plate and air valve spring. Lift the air/gas valve from mixer bowl.

5. Clean the mixer bowl assembly in safety solvent. Do not use carburetor cleaner as it will attack synthetic rubber seals.

Reassembly

1. The RK-CA55 kit includes:

• AV1-14925 Air/Gas Valve Assy (RK-55-2 kit supplies the AV1-14926 “lean” valve.)

• AP2-14700 Plate, Check Valve Assy

• P4-1 Piston, Idle Cutoff

• S2-44 Spring, Idle Cutoff

• S1-3 Screws (4), 10-24 x 5/8”

• G1-92 Gasket

• PPI-55 Repair Kit Instructions

2. Place the air/gas valve assembly in the mixer bowl.

3. Place the air/valve spring and check valve plate in the mixer bowl.

4. This illustration shows the mixer bowl assembled with the check valve assembly centered towards air horn. The idle cutoff piston and spring are shown in place ready for assembly to the mixer bowl.

5.Place the gasket on the throttle body retainingthe idle cutoff piston in its recess (under thumb,as shown in the illustration).

6.While holding the gasket and idle cutoff pistonin place, turn the throttle body over. Note cutoutof the gasket designed to clear the check valveassembly on plate.

7.Lower the throttle body gently onto the mixerbowl making sure idle cutoff piston does notescape from its recess. Once the throttle body isflush on the mixer bowl, align the holes and startthe 4 screws.